LokBuild Eigenschaften:
Are you having difficulties getting your 3D prints to stick without warping? Struggling to remove your finished model after printing? Tired of messing around with inadequate solutions such as kapton, blue builders tape, hairspray and ABS slurry? LokBuild is the answer!
LokBuild provides the perfect printing surface for 3D models to adhere and also allows completed objects to be removed easily. LokBuild is a durable sheet that sticks to the bed of 3D printers.
What is LokBuild?
LokBuild is the ultimate 3D printing surface for FFF/FDM 3D printers. It is a long lasting alternative to films and tapes.
LokBuild can be easily cut to suit the exact shape and size of your 3D printers build surface. LokBuild is made from uniquely textured sheets that attach to your build plate easily with heat-resistant adhesive backing.
LokBuild replaces the need for blue masking tape or polyimide films such as Kapton Tape. It is made from heat-resistant materials to provide a stable build platform for 3D printed models whilst allowing completed models to be removed easily.
LokBuild Materials:
We are constantly testing new materials. Here is a list of just some materials that have been successfully printed on LokBuild...
ABS, PLA, HIPS, PET
colorFabb_XT, colorFabb nGen, colorFabb_HT, colorFabb XT-CF20 (carbon fibre), Woodfill, Bronzefill, Copperfill, Brassfill,
Polymaker PC-Plus (polycarbonate), Polymaker PC-Max (polycarbonate), Polymaker PolyFlex, Ninjaflex, Green-Tec extrudr, PETG extrudr
Installation:
1) Wipe down the build platform making sure it is clean.
2) Trim LokBuild to match the shape and size of your build plate. This can be done easily with general household scissors or a craft knife.
3) Remove the adhesive backing and apply LokBuild to the build plate. Start from one side and work your way to the other side, smoothing LokBuild as you go.
4) Adjust the printers nozzle height and check that the build surface is level.
How to clean LOKBUILD:
LokBuild should not need to be cleaned very often but if you do please use alcohol wipes or similar (low % Isopropyl).
Do not use acetone or anything with a high % Isopropyl, this will damage the surface.
Optimale 3D-Druckoberfläche
Verbessert die Modellhaftung
Verringert Warping
Einfachere Kalibrierung der Düsenhöhe
Langlebig Schützen Sie Ihr Druckbett
Einfache Entfernung von fertigen Objekten
One Build Surface für die meisten Materialien (ABS, PLA, Nylon, Laywoo-D3, Green-Tec, PETG, HIPS, u.v.w.)
MODIFI3D liegt perfekt in Ihrer Hand, das Nachbearbeiten Ihrer 3D Objekte wird einfacher als je zuvor.
4 auswechselbare Aufsätze:
-Messer
-Nadel
-Punkt
-Schaufel Aufsatz