The Bambu Lab A1 is brilliant!

Key technology with images Video about the device Contents of the package

Fully automatic calibration

With absolute ease, the A1 carries out the various calibrations all by itself. It calibrates the Z-offset, bed height, vibration resonance and nozzle pressure for EVERY print job automatically and meticulously.

AMS Multicolour Printing

The most reliable multicolour system, AMS lite is recognised as the most reliable 3D colour printing solution. It also features RFID synchronisation to automatically find the best print settings for your Bambu filaments, delivering perfect print quality without the need for manual adjustment of the filament profile.

High-speed precision

The high speed you can really rely on The A1 is equipped with low-friction linear rails, a powerful MCU, acceleration sensors, a nozzle pressure sensor and an advanced motion control system that allow it to reach its full potential. Its high-speed performance is built on a solid foundation that ensures consistent reliability with stable and uniform output on every print.

Intelligent print monitoring

Put your print on autopilot 3D printing is a complex task where many things can go wrong. The A1 is equipped with a comprehensive print status monitoring system that helps you keep the print job under control. Full-size print volume – plenty of space for your imagination. The A1 has a print volume of 256mm x 256mm x 256mm, larger than most entry-level printers. Print a helmet in one go – we’ve got you covered.

Active motor noise cancellation

The A1 can calibrate the parameters to compensate for minute individual differences between the individual drive motors. This compensates for the unwanted roughness of motor noise.

Fully automatic calibration

The A1 performs various calibrations entirely on its own. It automatically and carefully calibrates the Z-offset, bed height, vibration resonance and nozzle pressure for EVERY print job.

Active flow rate compensation

The A1 revolutionises flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. The algorithm actively compensates for the flow rate based on the readings to ensure accurate extrusion.

Multi-colour printing

The brand-new AMS lite is sleek and reliable, making multi-colour 3D printing accessible to everyone.

Bed Slinger, with CoreXY speed and quality

All-metal rails, rigid frame, nozzle pressure sensor, acceleration sensors, powerful MCU and, above all, an advanced motion control system that utilises these features to print a 14-minute Benchy in high quality and in accordance with all the rules of Speed Benchy, without using special filaments.