Description
TROLLFACTORY - PU Casting Resin 2min - 500g
TFC PU Casting Resin 2min 1:1
TFC PU Casting Resin is a high-quality, virtually odourless two-component casting compound.
Suitable for moulds, master models, figures, core cores, negatives, control casts, sample parts, etc.
Properties and application:
- low odour
- simple mixing ratio of 1:1 by weight
- very good flow properties
- very high strength
- impact-resistant after full cure
- Colour after full cure: white to beige
- can be coloured with our casting resin colours
- not UV-resistant
- can be easily machined (drilled, sanded, etc.) after full cure
- forms a sealed surface that can be painted and decorated
Main areas of application
- Production of moulds, models, cores and tool components in mould making and model making
- Production of decorative objects for crafts and arts and crafts
- Production of figures, dioramas, miniatures and small parts with particularly fine contours
- Universal for moulds and models of all kinds
Further product information:
- Colour: A whitish/beige and B beige
- Mix: 1:1 by weight
- Specific gravity: 1.00
- Viscosity 60 mPas
- Working time (100g) at 25°C 2 minutes
- Demoulding time at 25°C 15 minutes
- Shore D hardness 75
- Heat-resistant up to approx. 65–70°C
- Tensile strength 27 MPa
- Elongation at break 5%
- Flexural strength 32 MPa
- Modulus of elasticity from flexural test 660 MPa
- Linear shrinkage approx. 0.16%
Product advantages at a glance
- Polyurethane casting resin
✓ Liquid synthetic resin for the production of cast resin bodies with a Shore D hardness of 75. The working time is 2 minutes at 25 °C.
- Contents
✓ High-quality, low-odour 2-component casting resin with a mixing ratio of 1:1 between the base (resin) and the catalyst (hardener).
- Properties
✓ Very high level of detail, flowability, strength and impact resistance after full curing. Easy further processing possible thanks to a smooth surface.
- Applications
✓ Casting and production of universal moulds and models of all kinds. Due to its impact resistance, the cured casting compound can be easily drilled or sanded.
TFC Troll Factory Casting Resin 2 x 250 g
✓ Supplied in a practical squeeze bottle with a dosing cap. High-quality ingredients for true-to-life models – Quality Made in Germany.
Application instructions
Before use, mix both components thoroughly but separately.
Mix both components thoroughly at room temperature (> 18°C) in accordance with the specified mixing ratio.
Before pouring, ensure that parts and moulds are free from moisture and any unreacted release agents.
Options
