TROLLFACTORY - Mould Release Spray with Wax - 400ml

TFC Release Spray with Wax for Resin Casting, Silicone-Free 400ml

Properties:

Release agent in spray form

The release agent is silicone-free!

Suitable for polyester and epoxy resins, PMMA, polyurethanes

For mould making

Aerosol: Active ingredients with propane/butane as propellant

Advantages:

- Excellent separating effect

- Free from CFC propellants

- Wide range of applications

- Easy to apply

Application:

Shake the can well before use.

The release agent must be sprayed thinly and evenly onto the
mould surface from a distance of 20 to 30 cm.

If a particularly smooth surface is required, the release film can be wiped with a
soft cloth.

Storage:

Protect from cold and heat.

Warm cold products to room temperature before use. Shake well.

Storage temperature: between 10°C and 30°C

Shelf life: approx. 36 months (unopened original container)

Physical and chemical characteristics:
Density at 20°C: 0.645 g/ml DIN 51757

Please check for material compatibility before use!