Description
TROLLFACTORY - PU Casting Resin 9min - 500g
TFC PU Casting Resin 9min 1:1
TFC PU Casting Resin is a high-quality, virtually odourless two-component casting compound.
Suitable for moulds, master models, figures, cores, negatives, control casts, sample parts, etc.
Properties and application:
- low odour
- simple mixing ratio of 1:1 by weight
- very good flowability
- very high strength
- Impact-resistant after full cure
- Colour after full cure: white to beige
- Can be coloured using our casting resin colours
- Not UV-resistant
- Can be easily worked on (drilled, sanded, etc.) after full cure
- Forms a sealed surface that can be painted and decorated
Main areas of application
- Production of moulds, models, cores and tooling components in mould making and model making
- Production of decorative objects for crafts and arts and crafts
- Production of figures, dioramas, miniatures and small parts with particularly fine contours
- Universal for moulds and models of all kinds
Further product information:
- Colour: A whitish/beige and B beige
- Mixing ratio: 1:1 by weight
- Specific gravity: 1.00
- Viscosity 105 mPas
- Working time (100g) at 25°C 9 minutes
- Demoulding time at 25°C: 24 hours
- Shore D hardness: 75
- Heat-resistant up to approx. 65–70°C
- Tensile strength 23 MPa
- Elongation at break 20%
- Flexural strength 32 MPa
- Modulus of elasticity from flexural test 560 MPa
- Linear shrinkage approx. 0.18%
Product advantages at a glance
- Polyurethane casting resin
✓ Liquid synthetic resin for the production of cast resin bodies with a Shore D hardness of 75. The working time is 9 minutes at 25 °C.
Contents
✓ High-quality, low-odour 2-component casting resin with a mixing ratio of 1:1 between the base (resin) and the catalyst (hardener).
- Properties
✓ Very high level of detail, flowability, strength and impact resistance after full curing. Easy further processing possible thanks to a closed surface.
Applications
✓ Casting and production of universal moulds and models of all kinds. Due to its impact resistance, the cured casting compound can be easily drilled or sanded.
TFC Troll Factory Casting Resin 2 x 250 g
✓ Supplied in a practical squeeze bottle with a dosing cap. High-quality ingredients for true-to-life models – Quality Made in Germany.
Application instructions
Before use, mix both components thoroughly but separately.
Mix both components thoroughly at room temperature (> 18°C) in accordance with the specified mixing ratio.
Before pouring, ensure that parts and moulds are free from moisture and any unvented release agents.
Options
