Description
TROLLFACTORY - PU Casting Resin 4min - 500g
TFC PU Casting Resin 4min 1:1
TFC PU Casting Resin is a high-quality, virtually odourless two-component casting compound.
Suitable for moulds, master models, figures, core cores, negatives, control casts, sample parts, etc.
Properties and application:
- Low odour
- simple mixing ratio of 1:1 by weight
- very good flowability
- very high strength
- Impact-resistant after full cure
- Colour after full cure: white to beige
- Can be coloured using our casting resin colours
- Not UV-resistant
- Can be easily worked on (drilled, sanded, etc.) after full cure
- Forms a sealed surface that can be painted and decorated
Main areas of application
- Production of moulds, models, cores and tooling components in mould making and model making
- Production of decorative objects for crafts and arts and crafts
- Production of figures, dioramas, miniatures and small parts with particularly fine contours
- Universal for moulds and models of all kinds
Further product information:
- Colour: A whitish/beige and B beige
- Mixing ratio: 1:1 by weight
- Specific gravity: 1.00
- Viscosity 55 mPas
- Working time (100g) at 25°C 3–4 minutes
- Demoulding time at 25°C: 75 minutes
- Shore D hardness: 75
- Heat-resistant up to approx. 65–70°C
- Tensile strength 33 MPa
- Elongation at break 6%
- Flexural strength 33 MPa
- Modulus of elasticity from flexural test 650 MPa
- Linear shrinkage approx. 0.15%
Product advantages at a glance
- Polyurethane casting resin
✓ Liquid synthetic resin for the production of cast resin bodies with a Shore D hardness of 75. The working time is 4 minutes at 25 °C.
- Contents
✓ High-quality, low-odour 2-component casting resin with a mixing ratio of 1:1 between the base (resin) and the catalyst (hardener).
- Properties
✓ Very high level of detail, flowability, strength and impact resistance after full curing. Easy further processing possible thanks to a closed surface.
Applications
✓ Casting and production of universal moulds and models of all kinds. Due to its impact resistance, the cured casting compound can be easily drilled or sanded.
- TFC Troll Factory Casting Resin 2 x 250 g
✓ Supplied in a practical squeeze bottle with a dosing cap. High-quality ingredients for true-to-life models – Quality Made in Germany.
Application instructions
Before use, mix both components thoroughly but separately.
Mix both components thoroughly at room temperature (> 18°C) in accordance with the specified mixing ratio.
Before pouring, ensure that parts and moulds are free from moisture and any unreacted release agents.
Options
